FLOOR CERAMIC ADHESIVE
MM-401
Instant cement with a special formula for the installation of ceramics or natural stone on the floor.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion
2. Pour MM-401 into clean water gradually
3. Mix ratio: 9-9.5 liter/40 kg. Stir the mixture until smooth
4. Wet the ceramic before installing
5. Use a toothed trowel suitable for the application
6. The recommended application thickness is 3 mm for a maximum ceramic size of 80 x 80 cm
7. Pot life: 45 – 60 minutes.
WORKING TOOLS
Toothed trowel, rubber hammer, hand mixer.
BENEFITS
1. Has high adhesion and is plastic when applied.
2. Practical.
3. Resistant to expansion and shrinkage
4. Strong to withstand compressive loads on the ceramic surface
5. Consistent quality.
SPEAD COVERAGE
± 8 m2 / 40 kg / 3 mm
ADHESION STRENGHTH
EN 1348:1997 : 0,5 N/mm2 @ 28 days
USE
MM-401 can be applied on a variety of surfaces, namely:
1. a leveled surface
2. concrete floor surface
STORAGE
Store in a closed and dry room. Avoid excessive stacking, maximum 8 stacks per pallet (maximum 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging
WALL AND FLOOR CERAMIC ADHESIVE
MM-402
Instant cement with a special formula for installation of ceramics or natural stone on the floor and wall.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion.
2. Pour MM-402 into clean water gradually.
3. Mix ratio: 5.5-6 liter/25 kg. Stir the mixture until smooth.
4. Wet the ceramic before installing.
5. Use a toothed trowel suitable for the application.
6. The recommended application thickness is 3 mm for a maximum ceramic size of 30 x60 cm.
7. Pot life: 45 – 60 minutes.
WORKING TOOLS
Toothed trowel, rubber hammer, hand mixer.
BENEFITS
1. Has high adhesion and is plastic when applied.
2. Practical.
3. Resistant to expansion and shrinkage.
4. Wall tiles do not slide when installed.
5. Consistent quality.
SPEAD COVERAGE
± 5 m2 / 25 kg / 3 mm
ADHESION STRENGHTH
EN 1348:1997 : 0,5 N/mm2 @ 28 days
USE
MM-402 can be applied over various
1. plaster surface
2. concrete surface
STORAGE
Store in a closed and dry room. Avoid excessive stacking, maximum 8 stacks per pallet (maximum 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging
CERAMIC ADHESIVE ON CERAMIC
MM-403
Instant cement with a special formula for ceramic installation work on ceramics that have been installed on walls or floors.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion.
2. Pour MM-403 into clean water gradually.
3. Mix ratio: 9-9.5 liter/40 kg. Stir the mixture until smooth.
4. Wet the ceramic before installing.
5. Use a toothed trowel suitable for the application.
6. The recommended application thickness is 3 mm for a maximum ceramic size of 80 x80 cm.
7. Pot life: 45 – 60 minutes.
WORKING TOOLS
Toothed trowel, rubber hammer, hand mixer.
BENEFITS
1. Has high adhesion and is plastic when applied.
2. Replace the ceramic without disassembling it.
3. Resistant to expansion and contraction.
4. Strong compressive load on the ceramic surface.
5. Consistent quality.
SPEAD COVERAGE
± 8 m2 / 40 kg / 3 mm
ADHESION STRENGHTH
EN 1348:1997 : 1,0 N/mm2 @ 28 days
USE
MM-403 can be applied on a variety of surfaces, namely:
1. Tile, marble or granite wall and floor surfaces.
2. The surface of the red brick and light brick masonry.
3. stucco wall surface.
4. nat grout wall surface.
5. Concrete wall and floor surfaces.
6. leveling surface or screed.
STORAGE
Store in a closed and dry room. Avoid excessive stacking, maximum 8 stacks per pallet (maximum 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging
WET AREA CERAMIC ADHESIVE
MM-404
Instant cement with a special formula for special ceramic installation work in wet areas such as bathrooms, swimming pools, basements, etc.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion.
2. Tuangkan MM-404 ke dalam air bersih secara bertahap.
3. Mix ratio: 9-9.5 liter/40 kg. Stir the mixture until smooth.
4. Wet the ceramic before installing.
5. Use a toothed trowel suitable for the application.
6. Ketebalan aplikasi yang disarankan adalah 3 mm untuk ukuran keramik maksimum 60 x60 cm.
7. Pot life: 45 – 60 minutes.
WORKING TOOLS
Toothed trowel, rubber hammer, hand mixer.
BENEFITS
1. Has high adhesion and is plastic when applied.
2. Replace the ceramic without disassembling it.
3. Resistant to expansion and contraction.
4. Strong to withstand compressive loads on the ceramic surface.
5. Avoid popping (loose ceramics).
6. Consistent quality.
SPEAD COVERAGE
± 8 m2 / 40 kg / 3 mm
ADHESION STRENGHTH
EN 1348:1997 : 1,0 N/mm2 @ 28 days
USE
MM-404 can be applied on a variety of surfaces, namely:
1. concrete surface.
2. plaster surface.
3. Precast surface.
4. leveling surface or screed.
STORAGE
Store in a closed and dry room. Avoid excessive stacking, maximum 8 stacks per pallet (maximum 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging