PLASTER AND BRICK SET
MM-201
Instant cement with a special formula for
plastering and brick set.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion.
2. Pour MM-201 into clean water gradually.
3. Mixture ratio: 6 – 6.5 liters / 40 kg. Stir the mixture until smooth.
4. For brick set work, use a suitable masonry trowel. And for plastering work, use the appropriate plastering trowel.
5. Use a long margin of aluminum steel.
6. If the brick surface is too dry, make it wet with clean water.
7. The recommended application thickness is 10 mm, for plastering and brick set.
8. Pot life 20-30 minutes.
WORKING TOOLS
Trowel, long margin made of steel or aluminum, hand mixer, mixing bowl.
BENEFITS
1. Practical because it can be used as plaster as well as brick set.
2. Avoid cracking due to shrinkage of the plaster.
3. Save on the use of mixing materials.
4. The brick set is neater.
5. Consistent quality.
SPEAD COVERAGE
1.2 m2 / 40 kg / 10 mm
Plaster
1. Red Brick ±1.6m2/40 kg / 10 mm
2. Light Brick ±2 m2/40 kg / 10 mm
COMPRESSIVE STRENGTH
DIN 18555 Part 3 : 3 – 6 N/mm² @ 28 days
WATER RETENTION
DIN 18555 Part 7 : > 95 %
DRYING SHRINKAGE
ASTM C 596-01 : < 0,1 %
STORAGE
Store in a closed, dry, excess stack, up to 8 stacks per pallet (max 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging.
FINISH PLASTER
MM-202
Instant cement with special formula for
light brick plaster and can make
smooth surface without nat grout and ready to be painted.
HOW TO USE
1. Clean the surface from dirt that can reduce adhesion.
2. Pour MM-202 into clean water gradually
3. Mix ratio: 8 – 9 liters / 40 kg. Stir the mixture until smooth.
4. Use trowel plaster for application and leveling.
5. If the surface of the brick is too dry, make it wet with clean water.
6. The recommended application thickness is 5 – 8 mm.
7. Pot life: 20-30 minutes.
WORKING TOOLS
Trowel, long margin made of steel or aluminum, hand mixer, mixing bowl.
BENEFITS
1. Has high adhesion and is plastic when applied.
2. Practical because it can produce a smooth surface without the stages of nat grout.
3. Processing time is faster, so it is cost-effective.
4. Consistent quality
SPEAD COVERAGE
± 4,2 m2 / 40 kg / 5 mm
COMPRESSIVE STRENGTH
DIN 18555 Part 3 : 8 – 12 N/mm² @ 28 days
WATER RETENTION
DIN 18555 Part 7 : > 95 %
DRYING SHRINKAGE
ASTM C 596-01 : < 0,1 %
STORAGE
Store in a closed, dry, excess stack, up to 8 stacks per pallet (max 2 pallet stacks).
EXPIRED TIME
12 months when stored in closed and dry packaging.